An all-in-one polish and wax that removes light to medium paint defects — including swirls, imperfections, and up to P3000 sand scratches — while leaving behind a deep, glossy, waxed finish with up to 90 days of lasting protection. Dust-free application with a long working window means the entire vehicle can be polished before wiping off. Compatible with orbital polishers, rotary polishers, and hand application — and safe for use indoors, in shade, or in direct sunlight.
Features and Benefits
One-step technology — polishes and protects in a single application, cutting time without sacrificing results
Removes up to P3000 sand scratches — handles light to medium paint correction including swirls and surface imperfections
Protection lasts up to 90 days — leaves a slick, waxed surface with long-lasting defense after a single treatment
Dust-free, long working window — apply to the full vehicle before wiping off for maximum efficiency
Works with orbital polishers, rotary polishers, or by hand — fits any shop's existing equipment and workflow
Easy wipe-off formula — compound turns from yellow to opaque as a visual cue that it's ready to remove
Body shop safe — can be used in environments where fresh paint is being sprayed
VOC compliant — adheres to VOC regulations and can be sold in all 50 states
SDS, TDS, and Ingredient Documentation
To view the SDS, TDS, and associated ingredients for this product you can search them HERE.
How to use it?
1. Velocity™ can be used indoors, in a shaded area, or in direct sunlight. For best results, clean and decontaminate the paint surface with Malco CW-37 or a similar car wash product prior to application.
2. For extremely damaged surfaces, a heavy-duty compound such as Tru-Grit or EPIC may be required for initial correction before using Velocity™.
3. Shake before use.
4. Apply 4 medium-sized drops of compound to the pad and work in a crosshatch pattern until the compound turns from yellow to opaque in a 2' x 2' section.
5. To ensure maximum protection, allow the product to flash or dry on the surface before removing with a microfiber towel. The entire vehicle may be polished prior to removal.
Machine settings:
Orbital polisher: apply at a low-speed setting, then buff at setting 4-6.
Rotary polisher: apply at the slowest speed, then buff between 1,000-1,400 RPM.
By hand: use a clean, soft applicator for best results.
