EPIC ASCEND Ceramic Coating requires a clean, smooth surface for proper adhesion. Wash, clay bar, and machine polish your vehicle prior to application. If you cannot achieve a professional level of cleaning and paint correction on your own, please seek professional help. Ensure the vehicle is at room temperature (50°F - 75°F), at the time of application. Application must only take place in a covered, dust-free garage where the vehicle should remain for at least 24 hours following application.

For maximum results:

1. Prior to use, put on rubber gloves for protection and shake product well.
2. Clean and prepare your surface with EPIC Ceramic Final Prep Wipe (Part #1097), using a lint-free cloth.
3. Wrap a suede cloth around an applicator pad. For the first application, add 6 to 8 drops of coating directly to the cloth and immediately reseal the product. For subsequent applications, add 4 to 6 drops on the cloth.
4. Apply the coating to the vehicle surface in a crosshatch pattern, using even pressure. Work in a20-in x 20-in area of the vehicle surface, until the coating is worked into the clear coat.
5. Expect coated areas to rainbow or flash within 30-90 seconds of application. As flashing begins to occur, buff away excess coating with a clean, microfiber towel. Be sure to remove any remaining residue.
6. Repeat all steps to coat the entire vehicle, using an overlapping technique on each section to ensure full coverage.
7. Keep the vehicle in a garage or other controlled environment for at least 12 hours, and keep it dry for a minimum of 24 hours. Complete bonding with the paint can take up to seven days, so it is vital to have garage access.